Information based on query as of Sunday, June 30, 2024.
Permit Information
Permit NumberBLD04-00116
StatusFinaled
Name MICRON TECHNOLOGY INC
Site Address 8000 S FEDERAL WAY
Project Name 
Customer NumberPCS#7012
ePlanReviewNo
Description
Micron Building #1 - Remodel Plenum 6 (PCS #01-20047012) - To demolish and excavate below approximately 200 square feet (13.5'x15') of existing concrete slab floor and to pour a new concrete slab floor at 42 inches below existing floor and perimeter concrete retaining walls. To install new access floor system, remodel ceiling above this area and reconstruct 17 lineal feet of clean room wall. To relocate existing lights, electrical outlets and HVAC duct work to accomodate ceiling and wall modifications. This work is being done on the first floor of Building #1 between grid lines C&D and 3&4. All construction per the approved plans. #04-037/JCM
Contact Information
See Activities list for contact information
Show All Activities
DescriptionReceivedRequestedCompletedAM/PMDispositionAssigned To 
BLD-Final4/9/20044/9/20044/9/2004PPASS
DetailsJim Storey
Scheduled by a contractor via Hello! on 4/9/2004 at 6:45:56 AM. Contact: ###-####.
FIRE-Final Inspection4/9/20044/9/20044/9/2004APASS
DetailsRick Jackson
Scheduled by a contractor via Hello! on 4/9/2004 at 6:45:16 AM. Contact: ###-####. No fire alarm work or sprinkler work was required; the horn/strobe and heat detector were just replaced after the floor was replaced 4/9/2004 9:22:47 AM
BLD-Footing2/23/20042/26/20042/26/2004APASS
DetailsJim Storey
Scheduled by a contractor via Hello! on 2/23/2004 at 2:41:17 PM. Contact: ###-####.
BLD-Footing2/23/20042/25/20042/25/2004APASS
DetailsJim Storey
Scheduled by a contractor via Hello! on 2/23/2004 at 2:40:59 PM. Contact: ###-####.
BLD-Conference2/23/20042/24/20042/24/2004APASS
DetailsJim Storey
Scheduled by a contractor via Hello! on 2/23/2004 at 4:17:48 PM. Contact: ###-####.
BLD-Footing2/23/20042/24/20042/24/2004APASS
DetailsJim Storey
Scheduled by a contractor via Hello! on 2/23/2004 at 2:40:35 PM. Contact: ###-####.