RCE1875-Petra)(JACKSON JET CENTER) Exterior and interior remodel for a new assembly waiting/lobby area and new office areas within a two story building of an executive terminal and hangar facility per approved plans and CZC06-00026. The first floor is 6,755 sq. ft. and the new constructed second floor will be 2,623 sq. ft. The total building area is 9,378 sq. ft. This remodel will reduce the adjacent hangar to the East to 3,804 sq. ft. This building is separated from adjacent buildings to the east and west sides with existing and new 2-hour rated fire walls. This building is supposed to be an existing one-hour rated building. If not, it will be upgraded to a one-hour building under this permit. (roof-ceiling, floor-ceiling, exterior walls, bearing walls, columns etc…) Work to include miscellaneous nonstructural and structural demolition work including removing the existing second floor and stairways entirely, new constructed second floor with new joists/beams/columns and new reinforced concrete footings, a new open stairway, a new one-hour rated stair enclosure, a new spiral stairway, new handrails and guards, three new exterior steel constructed canopies, some new exterior stucco work, some new exterior windows and doors, new entrance/exit vestibules with power operated horizontal sliding doors, a new 2-hour rated fire wall section, new interior walls, new interior doors and windows, new accessible restrooms, a new accessible shower, interior finish, new suspended ceiling work, new counters and casework, mechanical work including five new HVAC rooftop units and associated ducting, new plumbing, and new electrical work. A Certificate of Occupancy is to be issued when completed and approved. Special Inspections required for structural steel welding and for epoxy/adhesive anchors. NOTE: This building is not fire sprinklered. JCB