Permit Number | BLD06-02449 |
Status | Finaled |
Name |
WILLIAM SMITH
|
Site Address |
3214 E AMITY RD
|
Project Name | |
Customer Number | |
ePlanReview | No |
Description |
(CORVARA LLC) To prepare an existing 11,360 sq. ft. warehouse (8,320 sq. ft.) & attached covered storage area (3,040 sq. ft.) building for future undefined uses per approved plans. NO TENANT DECLARED OR USE ALLOWED WITHIN THE SCOPE OF THIS PERMIT. Work includes excavation, forming, rebar placement and pouring of concrete for (7) buttress at columns of structure along the North wall and one at each end wall (East & West) per engineering details to resist outward thrust at columns when interior elevated concrete floor is removed. SPECIAL INSPECTION IS REQUIRED FOR CHEMICAL ANCHOR, HILTI HY-150, ER-5193 (copy atached to plans). After buttress' are sufficiently strong to withstand outward thrust at columns, interior demolition of existing sprinkler system, office, restrooms & associated electrical, plumbing & mechanical will be done in preparation for removal of elevated portion of concrete floor & support base (no new electrical, mechanical or plumbing were shown on plans and are not a part of this permit scope of work). New work is limited to description submitted by architect resubmittal letter, attached to plans & the zoning certificate description. This includes preparation of new compacted base and to pour new portion of interior concrete floor to provide a 'one level' floor throughout. To prepare and pour new concrete slab with compacted base under 3,040 sq. ft. covered area; remove existing stairs and doors at exterior perimeter per plan and install new lower doors in same locations to match new floor grade. To perform maintenance repair of existing standing seam metal roofing with materials to match existing; install new insulation in roof structure with minimum R-value of R-30 for metal purlin with thermal block or R-38 for metal purlin without thermal block for compliance with 802.2.4 IECC. Any Skylight replacement shall not exceed existing size and number and new skylights shall have a U-factor of .8 per Sec. 802 IECC as required by section 101.2.2.2 IECC; to infill portions of openings above lowered doors to match existing; and provide new landings at altered doors. All per approved submitted plans, declaration of limits of zoning certificate CZ06-00185, engineering and attached plan review clarifications. A "Letter of Compliance is required for this project for final approval of work. drs
|