Micron Building #02 - F1A (C9894) - Photo Bay 10 Remodel - To demo and remove interior partitions and doors to eliminate Smock Room #102B, Bootie #102A YA Sem Lab #105B and YA Prep Lab #105A. To sawcut and remove existing concrete floor, excavate and install 3'-6" reinforced concrete retaining walls and new concrete slab floor for raised floor system. To install new clean room wall system, two new 4070 doors, raised floor system and hepa filter ceiling system to create a new 27'-6" x 86'-6" (2,380 sq. ft.) Photo Bay 10 room #103D. To demo and remove second floor structural framing and floor deck between grid lines #11 & #12 and #C.9 & #B. To install new steel structural frame with 3/4" fire retardant treated plywood over metal floor deck for new mechanical equipment. To install new access vestibule walls and door at the Make Up Air Unit area of the roof. --- PLAN MODIFICATION (5/30/07) This permit was modified to eliminate two control areas and change occupancy classification from F-1 to H-5. To install approximately 90 lineal feet of clean room wall and four additional egress doors to create a 900 sq. ft. Bay 10 #103E and a 1,900 sq. ft. Service Aisle #103F at original Bay 10 area. This modification is also to change existing door swings and hardware as required to comply with H-5 egress requirements at the first and second floors. All construction per the approved plans. JCM