Information based on query as of Sunday, June 30, 2024.
Permit Information
Permit NumberBLD10-00228
StatusFinaled
Name KEN WELCH
Site Address 5207 W IRVING ST
Project NameKENNY'S ROD SHOP
Customer Number 
ePlanReviewNo
Description
(KENNY'S ROD SHOP) Interior and exterior remodel to an existing 7,500 sq. ft. building for a new auto body shop tenant per approved plans. Work to include: perform select interior demolition; remove select existing doors, door frames, and walls; install new steel I-beams and posts; frame in existing wall openings; replace specific existing overhead doors with new; remove portions of the existing ceiling structure and framing as designated on plans; remove the existing exterior steel siding and replace with new panel system; and install a pre-manufactured "Spray Net - Side Draft Spray Paint Booth". All work per the approved plans, Engineering, attached plan review report, and all other reviewing agencies approvals. NOTE: This building is fully fire sprinklered for one-hour substitution. Any modifications or alterations to the existing sprinkler system WILL require a separate permit. CZC10-00001 per Planning and Zoning. **SRZ**
Contact Information
See Activities list for contact information
Show All Activities
DescriptionReceivedRequestedCompletedAM/PMDispositionAssigned To 
BLD-Final4/26/20104/26/20104/26/2010PPASS
DetailsTom Arcoraci
ken Phone #: ###-####
BLD-Final4/15/20104/15/20104/15/2010PPASS
DetailsTom Arcoraci
Kenny Phone #: ###-####
FIRE-Final Inspection4/13/20104/13/20104/13/2010PPASS
DetailsTroy Cobbley
Life safety passed. I found a storage shed attached to the main building that had no fire sprinkler protection. I notified Scott and he is sending Jerry McAdams an email for enforcement to follow up on. Per the owner Commercial Fire has already been contacted to provide fire protection.
FIRE-Conference4/5/20104/6/20104/7/2010ADONE
DetailsTroy Cobbley
The builder was questioning door hardware on the southwest exit door. Single action is required and the thumbturn dead bolt needs to be removed.
FIRE-Conference4/2/20104/2/20104/2/2010PPASS
DetailsTroy Cobbley
I spoke to the owner/builder and clarified the requirements for the fire extinguisher located at the paint hood.
BLD-Framing/Rough-in3/9/20103/10/20103/10/2010APASS
DetailsTom Arcoraci
scott - please call 1/2 hr prior Phone #: ###-####