(TRAVEL CENTERS OF AMERICA - RACKING) Install new steel storage racking for tire storage exceeding 8' in height per structural engineering and approved plans. Work to include: Install 364 square feet (155'-9" X 28") of racking including aisles per engineering, attached plan review report, and the structural inspectors final approval. Hilti Kwik Bolt TZ anchors (ESR-1917) are called out to anchor racks. SPECIAL INSPECTIONS ARE REQUIRED. The design, testing and utilization of industrial steel storage racks shall be in accordance with the RMI/ANSI MH 16.1. A Letter of Completion is to be issued when done. The existing envelope is not being affected by this permit. "This building will have an approved Fire Alarm system installed under a seoarate permit. Any alterations or modifications to the buildings Fire Alarm system WILL REQUIRE A SEPARATE PERMIT and shall be installed per NFPA 72 as regulated by the Boise Fire Department." EACH RACKING SYSTEM SHALL HAVE A PLAQUE LOCATED AT EACH RACKING SYSTEM STATING THE MAXIMUM WEIGHT TO BE STORED ON THAT PERTICULAR RACKING SYSTEM PER THE ENGINEERS CRITERIA STATED ON THE PLANS FOR EACH RACKING SYSTEM. **SRZ**