Permit Number | BLD13-00120 |
Status | Finaled |
Name |
CARLSON MATERIAL HANDLING
|
Site Address |
7185 W BETHEL ST
|
Project Name | DARIGOLD-RACKING |
Customer Number | |
ePlanReview | No |
Description |
(DARIGOLD)(RACKING) To replace existing racking and install new steel storage racking exceeding a height of 8' within the annex building; Add standard selective pallet racks and replace racking on the South wall with new drive in racks per approved plans and structural engineering. SPECIAL INSPECTIONS ARE REQUIRED. Each unit will be bolted to the floor and have more than 36" isles between rows. The design, testing and utilization of industrial steel storage racks shall be in accordance with the RMI/ANSI MH 16.1. A Letter of Completion is to be issued when done. The existing envelope is not being affected by this permit. Original tenant permit completed under BLD10-01273. EACH RACKING SYSTEM SHALL HAVE A PLAQUE LOCATED AT EACH RACKING SYSTEM STATING THE MAXIMUM WEIGHT TO BE STORED ON THAT PERTICULAR RACKING SYSTEM PER THE ENGINEERS CRITERIA STATED ON THE PLANS FOR EACH RACKING SYSTEM. NOTE: Both buildings are fully fire sprinklered for for allowable area increase and high piled storage for occupancy use group "S1" requirements. Any alterations or modifications to the buildings Fire Sprinkler WILL REQUIRE A SEPARATE PERMIT and shall be installed per NFPA 13 as regulated by the Boise Fire Department." **SRZ**
|