(IDAHO HIGH SCHOOL ACTIVITIES – ENCLOSING OPEN AREA – WEST END OF BUILDING) (DRH16-00376) (12-19-17 PLAN MODIFICATION TO INSTALL WIDE FLANGE STEEL BEAMS ABOVE NEW OPENINGS IN AN INTERIOR MASONRY SHEAR WALL. TENSION PLATES WILL BE INSTALLED TO CONNECT THE BEAMS FROM END TO END SO THAT THE BEAMS AND STRAPS WILL ALL FUNCTION AS A DRAG STRUT. THIS REPLACES THE FORMERLY PROPOSED MASONRY LINTELS WITH STEEL ANGLES ON EACH SIDE ABOVE NEW OPENINGS. SPECIAL INSPECTION IS REQUIRED FOR WELDING. AT ANOTHER LOCATION, AN EXISTING COLUMN WILL BE CONCEALED BY AN EXTERIOR FURRED OUT WALL. IN ADDITION, THE HEIGHT OF THE TRASH ENCLOSURE WALLS WILL BE REDUCED FROM 7’- 4” TO 6’- 0”.) Drawings for permits BLD17-01479 and BLD17-01956 are filed under BLD17-01479 in ePlanReview. This building does not have a fire sprinkler system. To enclose a 998 square foot covered area that is part of a 6,424 square foot existing building. The roof structure above will remain. Work is to include concrete footings, concrete foundation stem walls, concrete slabs on grade, masonry exterior walls with interior continuous insulation, wood frame exterior walls with R-19 insulation, exterior windows, exterior door, interior doors, interior windows, millwork, and finishes. Special Inspection is required for concrete, masonry, and for post installed anchors in hardened concrete. This permit is intended to establish a new Certificate of Occupancy for the entire building. The work is required to comply with the approved drawings, with the plan review report, and with all applicable codes and ordinances. **CJW**