OFFICE ENVIRONMENT COMPANY * INSTALL STEEL RACKING AS MANUFACTURED BY INTERLAKE MATERIALS HANDLING* ENGINEERED BY BEN J. RIEHL, IDAHO LICENSED* LAYOUT PER FLOOR PLAN WITH (2)-1/2 ", HILTI-KB II, PER 3-1/2" x 7-3/4/" X 3/8" BASE PLATE AT EACH COLUMN LEG, OF SUFFICIENT LENGTH TO ALLOW MINIMUM OF 3-1/2" EMBEDMENT INTO EXISTING 6" CONCRETE SLAB. LOAD BEAMS LOCATED AT 78" & 180" TO TOP OF BEAM ABOVE FINISHED FLOOR. INSTALL INDIVIDUAL, MINIMUM 50 SQ. IN. PERMANENT PLAQUE'S, OF SUFFICIENT NUMBER, ALONG EACH LEVEL OF LOAD BEAMS (144" BEAM LENGTH) TO CLEARLY INDICATE MAXIMUM ALLOWABLE LOAD DESIGN OF 5400 LBS PER PAIR OF BEAMS, PER LEVEL. ALL PER CHAPTER 22, DIV. X, 1997 UBC, VOL.2, ENGINEERING, MANUFACTURE'S INSTALLATION INSTRUCTIONS AND APPROVED PLANS ON FILE. PC#703-99/ drs Note: This permit is being done in conjunction with BLD-02619.