Information based on query as of Friday, June 28, 2024.
Permit Information
Permit NumberELE15-00407
StatusFinaled
Name BETTER HOMES ELECTRIC
Site Address 418 S 9TH ST
Project NameTMN Events
Customer Number861-4497
ePlanReviewNo
Description
unit 208 Electrical Permit - Alteration: Remove, replace, and add fixtures. Add outlets, switches, and electrical support for beverage center. (coffee, microwave, frig)
Contact Information
See Activities list for contact information
Show All Activities
DescriptionReceivedRequestedCompletedAM/PMDispositionAssigned To 
Final4/7/20154/8/20154/8/2015APASS
DetailsRex Boyles
Builder has been reminded to have the doors unlocked for this final. Builder is at 861.4497 Zac if needed. Phone #: ###-#### Inspection requested via web by Paula Gratiot final ok
Final4/3/20154/6/20154/6/2015ANH
DetailsRex Boyles
Building will be unlocked. Thanks. Phone #: ###-#### Inspection requested via web by Paula Gratiot no access
Electrical Rough-In2/24/20152/25/20152/25/2015APASS
DetailsRex Boyles
Phone #: ###-#### Inspection requested via web by Paula Gratiot r/i ok corrections made
Electrical Rough-In2/19/20152/23/20152/23/2015AFAIL
DetailsCevyn Recla
Suite 208 known as TMN Events. General Contractor is Owyhee Enterprises. Phone #: ###-#### Inspection requested via web by Paula Gratiot
left message.
300.4(A) Cables and Raceways Through Wood Members.
(1) Bored Holes. In both exposed and concealed locations,
where a cable- or raceway-type wiring method is installed
through bored holes in joists, rafters, or wood members,
holes shall be bored so that the edge of the hole is not less
than 32 mm (11/4 in.) from the nearest edge of the wood
member. Where this distance cannot be maintained, the
cable or raceway shall be protected from penetration by
screws or nails by a steel plate(s) or bushing(s), at least
1.6 mm (1/16 in.) thick, and of appropriate length and width
installed to cover the area of the wiring.