DEMOLITION/INSTALLATION - MICRON B24 F4B (C8655) MURATEC STOCKERS AND AUTOMATION SYSTEM - This is a (3) phased with demolition permit. PHASE #1 is for removing 13 SSP's heads with piping in the ceiling, 10 SSU"s heads with piping in the interstitial (under catwalk). PHASE #2 is for the Muratec Install which entails the installation of 16 new SSP's with piping in the ceiling, and 5 new SSU's with piping in the lower interstitial (under catwalk). PHASE #3 is to relocate 28 existing SSP's on FlexHead® piping and install 6 new SSP's and piping in the ceiling. The location and coverage of heads will require 31 baffles to prevent cold soldering, all for the installation of Muratec Stockers and Automation System. The fire protection work shall comply with the IFC 2003 and the permit review comments; each regulated by the Fire Chief. The review comments, permit and fire "Inspection Card" are required to be on site as a condition of this work, to provide witness of compliance verification of minimum code. This permitted work scope is attached to BLD05-03247.