Scope of Work: Overhead & Underground
The Underground scope of work includes connecting to an existing C-900 connection from a gate valve near the property line, which was provided by others. Run the new section of 6” C-900 165’-0” out and up into the riser room. The underground supply will be controlled from a Wall PI located on the West side of the bldg. A new hydrant will be added by others, to be supplied from a separate UG tap off of the 8” loop. The sprinkler supply and Hydrant lines will be run with 18” of separation. The overhead fire sprinkler scope of work includes installing a 4” wet riser and a tree system to serve through out the entire 14,715-ft/2 two story bldg. The new facility will be built for heavy equipment repair and parts storage of Class IV up to 10’-0” in-rack. Any future racking plans shall be submitted under a separate permit. The fire sprinkler system work shall comply with the IFC 2003, the attached review comments/conditions, as regulated by the Fire Chief. The review comments/conditions, permit and fire "Inspection Card" are required to be on site as a condition of this work, to provide witness of compliance verification of minimum code. This permit is attached to building permit: BLD07-02067.