Information based on query as of Wednesday, July 17, 2024.
Permit Information
Permit NumberFIR08-00085
StatusFinaled
Name UNITED FIRE PROTECTION LLC
Site Address 10005 W PATTIE DR
Project Name 
Customer Number 
ePlanReview 
Description
overhead Scope of Work
Beginning from the Capped under ground supply, install a 1.5” Back Flow Device and wet riser. The wet system will serve through out this existing single story structure. In accordance with NFPA 13D. System shall be equipped with an alarm initiating device and an outside alarm. All fire sprinkler work and related, which includes dual use, single service water supply, the system backflow prevention device (provided by others), shall be per IFC2006 903, NFPA 13D, approved plans, engineering/red-lining and attached review comments, under direction of the Fire Chief. This permit is attached to: Under Ground Permit # FIR08-00470.03/18/08 Plan Review Comments:
These previously approved plans were resubmitted as an as-built set for review. As a result of changes to the piping plan during construction, the approved hydraulic calculations were affected. A new set of calculations have also been resubmitted for review. The revisions are noted as Rev. 1 and dated 03/07/08. These modifications affected 3 heads with in the remote area of operation
Contact Information
See Activities list for contact information
Show All Activities
DescriptionReceivedRequestedCompletedAM/PMDispositionAssigned To 
INSP-Final Inspection3/20/20083/20/20083/20/2008PPASS
DetailsTroy Cobbley
permit passed
INSP-Sprinkler Rough-in3/12/20083/12/20083/12/2008PPASS
DetailsTroy Cobbley
The piping can be covered by the deco shield.
INSP-Sprinkler Rough-in3/7/20083/7/20083/7/2008PPASS
DetailsTroy Cobbley
The tenting inspection is passed. The sprinkler piping can be covered with the blow-in insulation.
INSP-Sprinkler Rough-in2/25/20082/25/20082/25/2008PPART
DetailsTroy Cobbley
Rough-in inspection passed. Plans are being resubmitted as per Ben due to sprinkler heads being changed which is effecting the K factor. Piping in the kitchen wall can be covered. A tenting inspection will be required prior to covering with insulation.