Quick Permit
SHILO IS TO ATTACH TO AN EXISTING 4" DRY MAIN INSIDE OF THE DOOR SHOP WITH A MECH.TEE, USING GALV. PIPE ATTACH TO 2) 360 DEG. STD. RES. SSU. HEADS LOCATED INSIDE OF THE NEW HP BAGHOUSE DUST COLLECTOR THAT IS BEING INSTALLED OUTSIDE OF THE BUILDING. UNISTRUT WILL BE USED TO ATTACH THE PIPE TO THE DUST COLLECTOR.

Per the fire code plan review the inlet duct has spark detection and suppression system.

Dust Collector - To install an existing relocated stack-house dust collector to the side of an existing 38,711 square foot building. Work to include: construct the engineered foundation and connect the existing steel dust collector to the new foundation, install a spark detection & suppression system and mechanical work per the approved plans, engineering and all other reviewing agencies final approvals. All equipment shall be listed and labeled. THIS IS A SCOPE OF WORK PERMIT. A certificate of completion shall be issued when work is completed and a final inspection has occurred. This building was originally constructed in Ada County and later annexed into Boise City. NOTE: This building is to be fully fire sprinklered for area increase. ANY ALTERATIONS TO THE SPRINKLER SYSTEM WILL REQUIRE A SEPARATE PERMIT, and shall be installed per NFPA #13 as regulated by the fire department. **SRZ**