Information based on query as of Wednesday, July 17, 2024.
Permit Information
Permit NumberMEC19-02782
StatusFinaled
Name SNOWFLAKE AIR LLC
Site Address 4503 W IRVING ST
Project Name 
Customer Number3430
ePlanReviewNo
Description
Addition: New gas line, exhaust vents, ductless heating and cooling system
Contact Information
See Activities list for contact information
Show All Activities
DescriptionReceivedRequestedCompletedAM/PMDispositionAssigned To 
Final10/3/201910/3/201910/3/2019PPASS
DetailsJack Reynolds
Michael Phone #: ###-####
- final ok
Final9/27/20199/27/20199/27/2019PFAIL
DetailsJack Reynolds
Michael Phone #: ###-####
- need UL listed weather tight connectors for MC cables
- range venting needs a back draft damper
Rough-in7/11/20197/11/20197/11/2019PPASS
DetailsJack Reynolds
Michael Phone #: ###-####
- R/I ok
Rough-in7/10/20197/10/20197/10/2019PFAIL
DetailsJack Reynolds
Michael- please call for access. Phone #: ###-####
- gas line to range upstairs still needs proper striker plates installed. gas line is less than 2" away from stud edge
Pressure Test7/9/20197/9/20197/9/2019PPASS
DetailsJack Reynolds
20lb gas pressure test ok
Pressure Test7/9/20197/9/20197/9/2019PFAIL
DetailsJack Reynolds
Michael Phone #: ###-####
- condensate line in dinning room needs nail plates
- gas flex needs full striker plates installed and a protective sleeve installed at the water heater location
Pressure Test7/6/20197/8/20197/8/2019PFAIL
DetailsJack Reynolds
Phone #: ###-#### Inspection requested via web by Michael Stimpson
- fail gauge was under 20lb
Pressure Test7/1/20197/2/20197/2/2019AFAIL
DetailsJack Reynolds
Rough in and gas pressure test Phone #: ###-#### Inspection requested via web by Michael Stimpson
- gas pressure test fail need a 30lb gauge at 20lb
- gas line penetration needs protective tape installed
Rough-in7/2/20197/2/20197/2/2019AFAIL
DetailsJack Reynolds
Rough in and gas pressure test Phone #: ###-#### Inspection requested via web by Michael Stimpson
- need man J onsite and approved by city
- pressure test needs to be on a 30lb gauge and at 20lb
- condensate lines need nail plates
- line sets need nail plates
- dryer duct needs sealed
- range duct needs sealed
- exhaust fan needs connected to duct