THE SCOPE OF WORK FOR THIS QUICK PERMIT IS TO RELOCATE ONE (1) EXISTING CEILING MOUNT HORN/STROBE. THIS IS AN EXISTING BUILDING WITH A MAIN (1ST/) FLOOR AND A BASEMENT. THERE IS NO WORK BEING DONE IN THE BASEMENT.
THE TENANT IMPROVEMENT IS ON THE FIRST FLOOR AND INCLUDES CONVERTING/DIVIDING AN EXISTING CONFERENCE ROOM INTO SEVERAL PRIVATE OFFICES; AND CONVERTING/DIVIDING AN EXISTING STORAGE ROOM INTO A CONSULT OFFICE AND AN IT SERVER ROOM. THE EXISTING HORN/STROBE CURRENTLY IN THE ABOVE-MENTIONED CONFERENCE ROOM WILL BE RE-LOCATED TO THE NEW CONSULT OFFICE. AN EXISTING SMOKE DETECTOR IN THE ABOVE-MENTIONED STORAGE ROOM WILL REMAIN AS COVERAGE IN THE NEW IT SERVER ROOM. BATTERY CALCS: NOT PROVIDED BECAUSE NO CHANGES WILL BE NECESSARY TO THE EXISTING HORN/STROBE'S CANDELA RATING, AND IT WILL REMAIN ON THE SAME CIRCUIT (RPS-A4-2). IN ADDITION, THERE WILL BE NO CHANGES TO THE INITIATING DEVICES OR CIRCUITING.VOLTAGE DROPS: NOT PROVIDED BECAUSE THE EXISTING VOLTAGE DROPS WERE CALCULATED SO THAT THE MAXIMUM WIRE RUN FOR A4-2 IS 988FT ONE-WAY, AND THE NEW LOCATION OF THE DEVICE CHANGES THE EXISTING CIRCUIT LENGTH FROM 150FT TO 240FT, STILL WELL UNDER THE CALC'D 988FT (PLEASE SEE ATTACHED EXISTING SUBMITTAL INFORMATION). This work is associated with building permit BLD19-04214.